The LSR series is a SmartVisionLink™-enabled linear light that can produce over 340,000 lux and is offered in lengths up to 1200 mm. When used with the BTM-1000 Bluetooth accessory and the SmartVisionLink™ app, the LSR Series can have its intensity remotely adjusted. The LSR Series is easily mounted with the built-in T-slot rail system.
Recommended illumination usage: Bright Field, Direct Lighting, and Dark Field
- Built-in Multi-Drive allows for continuous or OverDrive strobe operation
- PNP and NPN strobe input
- 5-pin M12 quick connect
- SmartVisionLink Enabled - SmartVisionLink™-enabled provides easy intensity adjustment in both continuous and OverDrive™ modes
- Ability to control intensity for the entire light or for each 300mm length on 600mm and longer LSR's if using BTM-1000 Bluetooth Module†
The LSR900 from Smart Vision Lights is available in three lens variations
|Lens Option||Beam Angle|
Narrow 10 Deg
The standard lens option uses a 10° beam angle lens. Standard lenses create a narrow beam of illumination and are used for long working distances.
Wide, 30° angle-cone lenses create a large area of illumination. They create a floodlight effect and can be used for shorter working distances.
10 x 50 Degrees
The line lens option uses a 10° x 50° beam angle lens. They
Smart Vision Lights recommends the LSR Series be used at a working distance between 200 mm to 2000 mm
Smart Vision Link
|With integrated SmartVisionLink™, the LSR900 can be used with Smart Vision Light’s Bluetooth module (BTM-1000*). Users can install the SmartVisionLink™ app on Android or Apple phones and tablets to configure lighting parameters for each of the four lighting zones. Zone parameters include 10-100% intensity for both continuous and OverDrive™ strobe modes, as well as zone-disable. After parameters are set and saved, the BTM-1000 can be removed from the LSR900 and settings will be retained in LSR900E’s static memory. The SmartVisionlink™ app is available at no cost from the Google Play Store or Apple’s App Store.|
*The BTM-1000 is sold separately.
Connecting a BTM-1000 Module
The BTM-1000 can be connected directly to a light or attached to a jumper cable that is connected to a light. Once the light's intensity is set to desired level, the BTM-1000 can be removed from the light or cable. The pigtail end of the BTM-1000 is connected directly to the light or to the cable attached to the light.
For colors not listed or available online, contact Support@MachineVisionDirect.com
Wiring Configuration for CONSTANT ON Operation
Wiring Configuration for STROBE/PULSE Overdrive Operation
The LSR Series is easily mounted with the built-in T-slot rail system.
Possible Part Configurations:
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.